A.S Engineering

A laboratory incubator is a kind of heated, insulated box primarily designed to create and maintain microbiological or cell cultures. The main job of these lab incubators is to maintain the optimal humidity, temperature as well as gaseous content of the atmosphere inside. It is common to find a programmable timer in most of the lab incubators. Professionals are free to set any time through this feature to cycle through different humidity and temperature levels.

A S Engineering medical incubators are available in different sizes ranging from table-top units to cupboard-sized large systems. Our extensive line of lab incubators can be used for different types of highly regulated applications commonly available in the pharmaceutical, biomedical, medical research, and clinical laboratory. With 4-zone heated air jacket, microprocessor PID controls, ergonomic design, as well as precisely tuned and tested ventilation – A S Engineering Incubators could be your reliable lab equipment for universal application.

• Incubators Are Sturdy Double Walled Units.
• Inner Chamber Made Of M.Sì S.S And Outer made Of Mild Steel With Powder Coat
• Gap Between The Walls Fitted With Glass Wool Insulation To Avoid Heat Loses.
• Heating Elements Are Made Of High Grade Chrome Plated Nichrome Wire.
• Temp. Is Controlled By Thermostat.
• Temp. Range 5"c Above Ambient To 60”c And Accuracy: ±2e"C (With Digital Accuracy ±5e"C)
• Air Ventilations Is Provided On The Top Of The Unit To Remove The Hot Gases/Fumes
• In Lab Type Incubators Heaters Are Placed In The Bottom Side Of The Unit.
• All The Control Switches & Pilot Lamps Are Fitted On The Frond Panel.
• Trays Should Be Suppiled With G.I Wire Mesh.

• Incubators Are Sturdy Double Walled Units.
• Inner Chamber Made Of  S.S And Outer made Of Mild Steel With Powder Coat
• Gap Between The Walls Fitted With Glass Wool Insulation To Avoid Heat Loses.
• Heating Elements Are Made Of High Grade Chrome Plated N jerome Wire.
• Temp. Is Controlled By Thermostat.
• Temp. Range 5"c Above Ambient To 60”c And Accuracy: ±2"C (With Digital Accuracy ±5"C)
• Air Ventilations Is Provided On The Top Of The Unit To Remove The Hot Gases/Fumes
• In Lab Type Incubators Heaters Are Placed In The Bottom Side Of The Unit.
• All The Control Switches & Pilot Lamps Are Fitted On The Frond Panel.
• Trays Should Be Suppiled With G.L Wire Mesh.

   Optional Accessories :
   
1. Air Circulation Fan for Uniform Temperature.

2. Digital Temp. Controller cum indicator in lieu of thermostat with an accuracy of ± O.5 c.
   
3. S.S. Trays.